Although dangly earrings are popular, there are various earring back types to consider before making a purchase. French wires and lever backs are the two most frequent dangly earring back options. But which is the best option for you?
Dangle earrings with a bent hook that runs through your ear are French wire earrings, also known as shepherds hook ear wires. The back of the hook is open, allowing the earring to sit on the earlobe without using an earring back.
Earring findings aren’t new, but they’ve come a long way. It was first popular among men in the Persian Empire, and it remained that way for centuries until women regained control of ear adornments.
In the 1970s, nurses started attending ear piercing events in stores, eliminating the need for home piercings with a syringe and hoping that infections would not develop. Furthermore, ear-piercing guns were later designed, and better cleanliness procedures were implemented, resulting in higher acceptability of fashion piercings.
What are French Hook Ear Wires?
French hook ear wires are inexpensive and straightforward to remove, but they make it easy to lose an earring. In addition, while some individuals wear them with an actual earring back, they aren’t always compatible with metal earring backs and may require a rubber earring back instead.
Lever back earrings are earrings with a hinged, closed mechanism at the top. Although it looks like a French wire, the metal has a lever that closes the loop.
Because they include more metal in the design, lever back earrings are more expensive than French wire earrings, but they are generally more secure due to their enclosed design. Furthermore, they do not require additional earring backs to fasten the earring.
French hook ear wires are your best bet if you have a cheap set of earrings that you want to pull on and off quickly. These earrings are inexpensive and straightforward, with two rubber backs for added protection.
Stick to lever backs if you want to buy expensive earrings set for further protection. You don’t want to lose them; therefore, lever backs will keep the earring from falling out while you’re wearing it. Both sterling silver and gold lever backs and French wires are available.
Because components are often lower karat for both affordability and ease of fabrication, rarer metals such as gold and platinum may be supplied upon request or by certain producers. If you are allergic to certain base metals, switching to a high-quality hypoallergenic metal is to your best advantage.
You’re ready to go with dangly earring backs like French hook ear wires and lever backs!
What Are the Benefits of French Ear Wires?
Because they are affordable and straightforward to create by shaping wire, French ear wires are the most popular of all ear wires. By adjusting the shape, the wire, or adding ornaments to the hook itself, you may create various looks. However, French ear wires have the disadvantage of pushing forward out of the ear when the wearer wears certain hairstyles, scarves, or turtlenecks. A rubber back stopper can assist keep these earrings in place and prevent them from falling out.
How To Use French Wire in Jewelry Making?
Have you been looking for the right way to give your beaded jewelry a polished and professional finish? In beaded art, French wire, often known as bullion, will undoubtedly provide the best finish to specific crafting projects.
This tightly coiled wire makes elegant, flexible tubes ideal for beading wire junctions, clasps, and any possible attachment point. In addition, French wire is a versatile material that may create unusual junctures and protect stringing materials from abrasion.
French wire comes to the rescue when the thread is too fine to use crimp beads and tubes. Perhaps you’d want a different way to finish objects fluid and professionally; French wire is the answer. French wire is available in various dramatic hues and is constructed of silver, gold, copper, brass, or “vermeil.” As spacers, textured and twisted wire are also available. Wrap your 28-gauge wire around a 22-gauge headpin or wire to make French wire.
Slide your selected stringing material and a bead, clasp, or another component at a junction in your beading into the coils of bullion. Return the stringing material to the dot, clasp, or other element and pull it taut gently yet firmly. Keep the French wire centered as the loop closes, and you’ll have a solid and elegant manner of anchoring clasps and other components to your stringing material in a matter of seconds. You will not be sorry for adding French wire to your beading arsenal and keeping a supply on hand.
Xinar is home to the finest collections of beads and findings, among other jewelry-making supplies. Check out all our findings in semi-precious metals here.